General finishes seal a cell seal a cell application steps.
Seal a cell vs shellac.
Stir general finishes seal a cell before use to reincorporate solids that have settled to the bottom of the can.
The oils penetrate deep within the wood to highlight the warm natural look while the urethane insures a deep hardness.
If desired thin topcoat with 10 15 mineral spirits unless restricted by local or state regulations.
Before you even get started you have to learn the different types of shellac.
Open windows and doors or use other means to maintain fresh air flow during application and drying.
An unusual combination of oils and urethanes seal a cell clear for decades has served craftsman as the best way to get the that natural look on beautiful woods that are not to be stained.
If you are just wanting to seal sand the nibs and raised grain then finish you might as well just use whatever you are going to top coat it with especially if you seal it as the last stage of.
Stir general finishes seal a cell to reincorporate solids that have settled to the bottom of the can before use.
Shellac is a difficult finish or sealer to use.
The first reason is the confused naming.
I didn t have any seal a cell on hand so i used a cut shelac.
In liquid form there are clear actually pale yellow and amber shellacs.
As the other guys have said the sealers purpose is not as the final finish rather a compatable foundation for the next finish.
The seal a cell in that instance is to keep the dye from being darkened by the gel stain that is intended to fill grain.